ADS Vendor Component Documentation

... Products & Services > Agilent EEsof EDA > Product Documentation > Advanced Design System Documentation

VENDOR COMPONENT DOCUMENTATION
The optional vendor components libraries extend the capabilities of communications system design by providing online, real world components for more accurate simulation. You must be licensed for each library you want to use. Your simulation will fail if you attempt to simulate with an unlicensed library. Keep in mind that although the Library List displays all libraries, a library part does not get loaded into memory until you select it from the list. Note: Agilent Technologies does not include updated vendor libraries in the Advanced Design System user interface. Updated libraries may be obtained directly from the vendor. A list of vendor websites with links can be found at the following location: www.agilent.com/find/eesof-models For information on using these components, refer to Library Sources and General Usage. To display documentation for a component: Choose Insert > Component > Component Library (or click the Display Component Library List button) from a Design window to display the Component Library List Choose the component from the displayed list Choose Help > Component Help to display documentation for the component

RF Passive SMT Library Parameter and usage information on discrete-value linear models-capacitors, inductors, and resistors-representing 982 parts from 23 manufacturers.	Measurement-Based Murata Library Parameter and usage information on the Murata discrete-value linear models-capacitors and inductors-representing 211 surface mount capacitors and 114 surface mount inductors.	RF Transistor Library Parameter and usage information on packaged nonlinear models-GaAs FETs, MOSFETs, and BJTs-representing 767 parts from 15 manufacturers.
Microwave Transistor Library Parameter and usage information on nonlinear models-Chip BJTs, HEMTs, and Chip GaAs FETs.	High-Frequency Diode Library Parameter and usage information on nonlinear models representing 164 diodes from 7 manufacturers.	Analog Parts Library Parameter and usage information on nonlinear models- diodes, low and medium power BJTs and JFETs, and power MOSFETs-representing 4,186 devices for linear and nonlinear simulations up to 10 MHz. These parts are well-suited for lower-frequency RF and IC design applications.
S-Parameter Transistor Library Parameter and usage information on S-parameter data files representing 4,618 devices from 14 manufacturers.	System Library Parameter and usage information on non-surface-mount amplifiers, mixers, and filters, power dividers and switches and surface-mount (SMT) amplifiers, crystals, filters, and mixers representing 1273 parts.	Agilent Wireless Semiconductor Division (WSD) Components Parameter, usage information, and software to run in ADS for models compatible with Agilent Wireless Semiconductor Division (WSD) components. This library includes 447 S-Parameters, 81 HfDiodes, 26 RfTransistors, and 5 Microwave Transistor Library components.

Library Sources and General Usage Unless otherwise specified, the library components are listed in tables organized by manufacturer library group. The individual components provided in each group are listed by component name, along with relevant physical and electrical characteristics. The following table lists the source of the data, as well as the type of network in which the library can be used. The models have been developed from these sources: For some models, parts were selected by the respective manufacturers specifically for use in the libraries and the measurements were extracted and validated by Agilent EEsof developers. These models are identified in the table as Validated . Some models were developed by Agilent EEsof developers from manufacturer's data sheets. These models are identified in the table as Supplied. Murata capacitor models are extracted and verified by Murata up to the first two self-resonant frequencies of each device.

Library	Data Source	Available in:
Library	Data Source	RF/Analog	Digital Signal Processing	Layout
RF Passive SMT Library
SMT Capacitors	S	•	•	•
SMT Inductors	S	•	•	•
SMT Resistors	S	•	•	•
Measurement-Based Murata Library
Murata Manufacturing Capacitors	M	•		•
Murata Manufacturing Inductors	M	•		•
RF Transistor Library
Packaged GaAs FETs	V	•		•
Packaged Power MOSFETs	V	•		•
Packaged BJTs	V	•		•
Microwave Transistor Library
Chip BJTs	V	•
HEMTs	V	•		Pkg. only
Chip GaAs FETs	V	•
HF Diode Library
High Frequency Diodes	V	•		•
Analog Parts Library
Analog Parts	S	•
S-Parameter Transistor Library
S-Parameter Transistors	S	•	•
System Library
Amplifiers	S		•
Filters	S	•	•
Mixers	S		•
Power Dividers	S		•
Switches	S		•
SMT Amplifiers	S		•	•
SMT Crystals	S	•		•
SMT Filters	S	•	•	•
SMT Mixers	S		•	•
V = Extracted and Validated by Agilent EEsof developers S = Supplied by manufacturer data sheets M = Extracted and verified by Murata up to the first two self-resonant frequencies of each device

Selection by the respective manufacturers does not guarantee that the measurements used to extract the associated models in this library are in any way typical of the vendor manufacturing process. Agilent EEsof is solely responsible for the models provided in this library. Any questions regarding the use of the models should be directed to Agilent EEsof. Most library components are available for selection in the Layout window Library List.

Privacy Statement |

Legal |