Measurement Results for Expressions for Mobile WiMAX Wireless Test Benches

Measurement results from a wireless test bench have associated names that can be used in Expressions. Those expressions can further be used in specifying goals for Optimization and Monte Carlo/Yield analysis. For details on using expressions, see Measurement Expressions. For details on setting analysis goals using Optimization and Monte Carlo/Yield analysis, see Tuning, Optimization, and Statistical Design.

You can use an expression to determine the measurement result independent variable name and its minimum and maximum values. The following example expressions show how to obtain these measurement details where MeasResults is the name of the measurement result of interest:

• The Independent Variable Name for this measurement result is obtained by using the expression
  indep(MeasResults)
• The Minimum Independent Variable Value for this measurement result is obtained by using the expression
  min(indep(MeasResults))
• The Maximum Independent Variable Value for this measurement result is obtained by using the expression
  max(indep(MeasResults))

The following tables list the measurement result names and independent variable name for each test bench measurement.

Expressions defined in a MeasEqn block must use the full Measurement Results Name listed. Expressions used in the Data Display may omit the leading test bench name. You can also locate details on the measurement result minimum and maximum independent variable values by

• Referring to the measurement parameter descriptions when they are available (not all measurement parameter descriptions identify these minimum and maximum values).
• Observing the minimum and maximum independent variable values in the Data Display for the measurement.

WMAN_DL_802.16e_TX Measurement Results

WMAN_DL_802_16e_RX_Sensitivity Measurement Results

WMAN_UL_802_16e_TX Measurement Results

WMAN_UL_802_16e_RX_Sensitivity Measurement Results