de_set_port()

Sets attributes of a symbol port (pin) before it is created for the current window. Returns: none.

See also: de_place_port().

Syntax:

de_set_port(portName, portNum, portAngle[, type, power]);

where

portName is the port name (unused-reserved for future use).

portNum is the port number (integer > 0).

portAngle is the angle to use for instance connected by abutment to this pin.

type is optional; INPUT=0, OUTPUT=1, IN/OUT=2 (default is 0)

power is optional; power of pin.

Example:

de_set_port("", 1, 0.0);

Download Example File:

The following link(s) lead to the Agilent EEsof EDA Knowledge center website. You will need to register at this site with a valid support contract to download an example file.
Generate SnP Component

Where Used:

Schematic, Layout