de_set_trace_sim_mode()

Sets the trace simulation mode for the current window. Traces can be simulated as a simple interconnection (short), as a single element or as a series of interconnected transmission line elements with discontinuity. Currently, this command has no effect. Traces are simulated as simple nodal interconnections (shorts). Returns: none.

Syntax:

de_set_trace_sim_mode(mode);

where

mode is the choice for trace simulation, where:

• 0 = full discontinuities
• 1 = single element
• 2 = short

Example:

de_set_trace_sim_mode(1);

Where Used:

Schematic, Layout