de_set_trace_single_elem()

Sets the name of the element used when trace simulation is set to a single element. Currently, this command has no effect. All traces are simulated as simple nodal interconnections (shorts). Returns: none.

Syntax:

de_set_trace_single_elem(itemName);

where

itemName is the name of the component to simulate trace as. This component can have a width (W) and length (L) parameter. If they exist, L is set to the total trace length and W is set to the total trace width. This applies to traces connected pin-to-pin only (without tees).

Example:

de_set_trace_single_elem("MLIN");

Where Used:

Schematic, Layout