ConvPulseResp (Convolution Pulse Response)

Symbol

Parameters

start = start time for output data, ns
stop = stop time for output data, ns
step = step time for output data, ns
trise = pulse rise time, ps (10 to 90%)
period = pulse period, in ps
high = high value of pulse, in fV, pv, nv, uv, mv, or V (default)
low = low value of pulse, in fV, pv, nv, uv, mv, or V (default)
Z0 = impedance of transmit and receive ports

Notes

1. A template using this item can be accessed by selecting Insert > Template > ConvPulseRespT from the Schematic window.
2. ConvPulseResp emulates an instrument for measuring the reflection and transmission of a network. The test signal is a pulse waveform, whose characteristics you specify. There is one source port, and five receive ports. The source port is also used to measure the reflected signal. The simulation is carried out in the time domain, and if distributed elements are present in the network being simulated, the convolution simulator will be used. The example, RF_Board/TDRcrosstalk_prj shows this component applied.
3. This is a simulation component. No other simulation or control components are needed.