SP_Diff (Differential-Mode S-Parameters)

Symbol

Parameters

Start = start frequency in Hz, KHz, GHz, or MHz (default)
Start = stop frequency in Hz, KHz, GHz, or MHz (default)
NumPoints = number of points in a linear sweep
Z1 = port 1 port impedance (complex)
Z2 = port 2 port impedance (complex)

Notes

1. A template using this item can be accessed by selecting Insert > Template > SP_DiffT from the Schematic window.
2. SP_Diff sets up a swept-frequency S-parameter analysis. Ports 1 and 2 of the Network Analyzer are ungrounded, so the S-parameters of differential networks can be simulated without using baluns.
3. This is a simulation component. No other simulation or control components are needed.