MTee (Microstrip Tee Component)

Symbol

Parameters

Name	Description	Unit	Default
Subst	Microstrip substrate name	None	MSub1
F	Design frequency	GHz	1
Z1	Characteristic impedance of port 1	Ohm	50
Z2	Characteristic impedance of port 2	Ohm	50
Z3	Characteristic impedance of port 3	Ohm	50

Notes

1. MTee designs a microstrip tee given the substrate and desired characteristic impedance at each port.
2. Since the design uses the models inherent to ADS to compute the line width and length, there is no need for a dedicated Simulation Assistant, Optimization Assistant, or Display Assistant.
3. Z1, Z2, and Z3 are used to determine the widths of each port. Refer to the discussion of the MTEE component in the Microstrip Components documentation for a more detailed description of this component.
4. A SmartComponent subnetwork is empty until the Design Assistant is used to generate the design. Refer to Design Assistant.

Passive Circuit DG - RLC