BIPHASE_RX_REFERENCE_PULSER

This component outputs the same waveform as BIPHASE_TX_PULSE_GENERATOR when the data input is all 1s. The waveform output from this test block represents a bi-phase modulated UWB waveform. The input data bits are spread using a spreading code. The pulse shape output is determined by selecting PULSE_SHAPE_GENERATOR sub-components; for details, refer to PULSE SHAPE GENERATOR.

Subnetwork

Parameters

Name	Description	Default	Unit	Type	Range
ChipsPerBit	Number of pulses transmitted for each bit	1		Integer	>1
ChipInterval	Time between pulses	1 nsec	Time	Real	>0
PulseWidth	Width of output pulse	250 psec	Time	Real	>0
PulseEnergy_joule	Total energy of the output pulse in Joules.	1e-12		Real	>0
DoubletSeparation	Time between the positive and negative peaks of the waveform	350 psec	Time	Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Inputs

Pin	Name	Description	Signal Type
1	Spreading Code Input	Coding sequence used to spread data being transmitted input as binary bits.	Integer

Outputs

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs pulse with shape determined by which pulse generator subcomponent is selected.	Float