PULSE_SHAPE_GENERATOR

To select a pulse shape, push into the PULSE_SHAPE_GENERATOR component; enable the component for the desired pulse shape; disable the unused components.

In simulations, TStep is approximately PulseWidth/10. One pulse waveform is output each time the input signal amplitude equals 1. The total waveform width is 3.603×PulseWidth. When pulses overlap, the first pulse is truncated.

Subnetwork

Pin	Name	Description	Signal Type
1	Trigger Input	An input impulse with magnitude 1 triggers PULSE_SHAPE_GENERATOR to output pulse	Float

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs pulse with shape determined by pulse generator subcomponent	Float

The GAUSSIAN_DOUBLET_UWB_Transmitter
generates a pair of Gaussian monopulse waveforms of opposite polarity.

Name	Description	Default	Unit	Type	Range
PulseWidth	Width of output pulse at 1/2 maximum amplitude of each of Gaussian monopulses that make up the doublet	250 psec	Time	Real	>0
DoubletSeparation	Time between the positive and negative peaks of the waveform	250 psec	Time	Real	>0
PulseEnergy_joule	Total energy of the output pulse in Joules. This value will not be calibrated when the individual pulses of the doublet overlap	1e-12		Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Pin	Name	Description	Signal Type
1	Trigger Input	An input impulse with magnitude 1 triggers the output of a Gaussian doublet pulse	Float

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs Gaussian doublet pulse waveform	Float

The GAUSSIAN_FIRST_DERIVATIVE_UWB_Transmitter
outputs a pulse with the shape of the first derivative of a Gaussian monopulse when a 1 is input.

Name	Description	Default	Unit	Type	Range
PulseWidth	Width of output pulse at 1/2 maximum amplitude of Gaussian monopulse of which the output waveform is a first derivative	250 psec	Time	Real	>0
PulseEnergy_joule	Total energy of the output pulse in Joules	1e-12		Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Pin	Name	Description	Signal Type
1	Trigger Input	An input impulse with magnitude 1 triggers the output of a Gaussian first derivative pulse	Float

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs Gaussian first derivative waveform	Float

The GAUSSIAN_MONOPULSE_UWB_Transmitter
outputs a Gaussian-shaped monopulse when a 1 is input.

Name	Description	Default	Unit	Type	Range
PulseWidth	Width of output pulse at 1/2 maximum amplitude	250 psec	Time	Real	>0
PulseEnergy_joule	Total energy of the output pulse in Joules	1e-12		Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Pin	Name	Description	Signal Type
1	Trigger Input	An input impulse with magnitude 1 triggers the output of a Gaussian monopulse	Float

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs pulse with single Gaussian shaped pulse	Float

The GAUSSIAN_SECOND_DERIVATIVE_UWB_Transmitter
outputs a pulse with the shape of the second derivative of a Gaussian monopulse when a 1 is input.

Name	Description	Default	Unit	Type	Range
PulseWidth	Width of output pulse at 1/2 maximum amplitude of Gaussian monopulse of which the output waveform is a second derivative	250 psec	Time	Real	>0
PulseEnergy_joule	Total energy of the output pulse in Joules	1e-12		Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Pin	Name	Description	Signal Type
1	Trigger Input	An input impulse with magnitude 1 triggers the output of a Gaussian second derivative pulse	Float

Pin	Name	Description	Signal Type
2	Pulse Output	Outputs Gaussian second derivative waveform	Float