UWB_BIT_SLICER_UWB_Receiver

The bit slicer captures the correlator integrator output value immediately before the integrator resets. This value is used to determine whether the output is a 0 or 1 bit.

Name	Description	Default	Unit	Type	Range
ChipsPerBit	Number of pulses transmitted for each bit	1		Integer	>1
ChipInterval	Time between pulses	1 nsec	Time	Real	>0
TStep	Time step of the simulation	10 psec	Time	Real	>0

Pin	Name	Description	Signal Type
1	Input	Signal from output of correlator integrator.	Float

Pin	Name	Description	Signal Type
2	Bits Output	Demodulated data bits	Integer