UWB_Interference_Source

The component provides a second UWB signal source for use as a wideband interfering signal.

Name	Description	Default	Unit	Type	Range
TStepsPerPPMBitOffset	Number of TStep intervals between 1 and a 0 position in a PPM pulse interval	50		Integer	>0
ChipsPerBit	Number of pulses transmitted for each bit	1		Integer	>0
ChipInterval	Time between pulses. For PPM this is the nominal time between pulses.	1 nsec	Time	Real	>0
TStepsPerDither	Determines the number of simulation time steps between each possible position.	5		Integer	>0
DitherBits	Number of bits used to the dither position of a PPM pulse within each pulse interval. 2 DitherBits pulse positions are possible within each PPM pulse interval.	5		Integer	>0
PulseWidth	1/2 amplitude pulsewidth of a Gaussian monopulse output. For the Gaussian derivative pulse shapes, this is the 1/2 amplitude pulsewidth of the Gaussian monopulse from which it is derived.	100 psec	Time	Real	>0
DoubletSeparation	Time between the positive and negative peaks of the waveform when doublet pulse is used. (Used when doublet waveform is selected.)	400 psec	Time	Real	>0
PulseEnergy_joule	Energy in Joules of single pulse output from the pulse generator.	1e-12		Real	>0

Pin	Name	Description	Signal Type
1	Output	Output a UWB waveform	Time