Lumped
AIRIND1 (Air Core Inductor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for AIRIND1 in ADS.
| GENESYS Symbol |
ADS Component |
| INDUCTOR |
AIRIND1 |
| All other symbols |
AIRIND1 using the Intermediate Subcircuit named genesyslib_AIRIND1_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| N |
N |
|
| D |
D |
|
| L |
L |
|
| WD |
WD |
|
| RHO |
Rho |
|
| |
Temp |
Set to the ADS default value (blank) |
| |
All other ADS parameters are set to their default values. |
|
CAP (Ideal Capacitor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for C in ADS.
| GENESYS Symbol |
ADS Component |
| CAPACITOR |
C |
| All other symbols |
C using the Intermediate Subcircuit named genesyslib_CAP_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| C |
C |
|
| |
All other ADS parameters are set to their default values. |
|
CAPQ (Capacitor with Q)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for CAPQ in ADS.
| GENESYS Symbol |
ADS Component |
| CAPACITOR |
CAPQ |
| All other symbols |
CAPQ using the Intermediate Subcircuit named genesyslib_CAPQ_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| C |
C |
|
| QC |
Q |
|
| F |
F |
|
| MODE |
Mode |
|
| RDC |
RDC = 0 |
See note 1. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
Notes
- The GENESYS parameter RDC has an effect only at DC. The ADS parameter Rdc has an effect at all frequencies.
CIR3 (Ideal 3-port Circulator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Circulator in ADS.
| GENESYS Symbol |
ADS Component |
| CIR3 |
Circulator |
| All other symbols |
Circulator using the Intermediate Subcircuit named genesyslib_CIR3_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| Z |
Z1 = Z |
|
| |
Z2 = Z |
|
| |
Z3 = Z |
|
| |
All other ADS parameters are set to their default values. |
DIPOLE (Dipole Antenna)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS ANTENNA documentation or refer to the documentation for AntLoad in ADS.
| GENESYS Symbol |
ADS Component |
| ANTENNA |
AntLoad |
| All other symbols |
AntLoad using the Intermediate Subcircuit named genesyslib_DIPOLE_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| LEN |
Length |
|
| LD |
RatioLR = 2*LD |
| |
AntType = DIPOLE |
|
| |
All other ADS parameters are set to their default values. |
GAIN (Ideal Gain Block)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model.
| GENESYS Symbol |
ADS Component |
| BLOCK |
GAIN |
| All other symbols |
GAIN using the Intermediate Subcircuit named genesyslib_GAIN_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| A |
A |
|
| S |
S = S*3.32193 |
Converts from db/octave to db/decade |
| F |
F |
|
| |
All other ADS parameters are set to their default values. |
|
IND (Ideal Inductor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for L in ADS.
| GENESYS Symbol |
ADS Component |
| INDUCTOR |
L |
| All other symbols |
L using the Intermediate Subcircuit named genesyslib_IND_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| L |
L |
|
| |
All other ADS parameters are set to their default values. |
|
INDQ (Inductor with Q)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for INDQ in ADS.
| GENESYS Symbol |
ADS Component |
| INDUCTOR |
INDQ |
| All other symbols |
INDQ using the Intermediate Subcircuit named genesyslib_INDQ_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| L |
L |
|
| QL |
Q |
See note 1. |
| F |
F |
|
| MODE |
Mode |
See note 1. |
| RDC |
Rdc = 0 |
See note 2. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
Notes
- For low Q (10 or less) and Mode not set to 1 (Proportional to frequency), the ADS and GENESYS simulation results start to differ for frequencies below F.
- The GENESYS parameter RDC has an effect only at DC. The ADS parameter Rdc has an effect at all frequencies.
ISOLATOR (Ideal Isolator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for IsolatorSML in ADS.
| GENESYS Symbol |
ADS Component |
| BLOCK |
IsolatorSML |
| All other symbols |
IsolatorSML using the Intermediate Subcircuit named genesyslib_ISOLATOR_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| Z |
Z1 = Z |
|
| |
Z2 = Z |
|
| |
All other ADS parameters are set to their default values. |
|
MONOPOLE (Monopole Antenna)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for AntLoad in ADS.
| GENESYS Symbol |
ADS Component |
| ANTENNA |
AntLoad |
| All other symbols |
AntLoad using the Intermediate Subcircuit named genesyslib_MONOPOLE_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| LEN |
Length |
|
| LD |
RatioLR |
|
| |
AntType = DIPOLE |
|
| |
All other ADS parameters are set to their default values. |
|
MUCQ<n> (<n> Mutually Coupled Coils)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MUC2 thru MUC10 in ADS.
| GENESYS Symbol |
ADS Component |
| |
MUC2 thru MUC10 |
| All other symbols |
MUC<n> using the Intermediate Subcircuit named genesyslib_MUCQ<n>_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| Ln |
Ln |
|
| Kij |
Kij |
|
| Qn |
|
Not supported by the ADS component. |
| RDn |
Rn = 0 |
See note 1. |
| F |
|
Not supported by the ADS component. |
| MODE |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
Notes
- The GENESYS parameters RDCn have an effect only at DC. The ADS parameters Rn have an effect at all frequencies.
MUI (Two Mutually Coupled Inductors)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MUC2 in ADS.
| GENESYS Symbol |
ADS Component |
| MUTUAL |
MUC2 |
| All other symbols |
MUC2 using the Intermediate Subcircuit named genesyslib_MUI_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| L1 |
L1 |
|
| L2 |
L2 |
|
| K |
K12 |
|
| |
R1 = 0 |
|
| |
R2 = 0 |
|
| |
All other ADS parameters are set to their default values. |
OPA (Operational Amplifier)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for OpAmpIdeal in ADS.
| GENESYS Symbol |
ADS Component |
| |
OpAmpIdeal |
| All other symbols |
OpAmpIdeal using the Intermediate Subcircuit named genesyslib_OPA_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| RI |
Rdiff |
|
| RO |
Rout |
|
| G |
Gain |
|
| F |
BW |
|
| |
All other ADS parameters are set to their default values. |
PFC (Parallel LC Resonator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| PFC |
PLCQ |
| All other symbols |
PLCQ using the Intermediate Subcircuit named genesyslib_PFC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| F |
 |
|
| C |
C |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values. |
|
PFL (Parallel LC Resonator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| PFC |
PLCQ |
| All other symbols |
PLCQ using the Intermediate Subcircuit named genesyslib_PFL_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| F |
 |
|
| L |
L |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values. |
|
PLC (Parallel LC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| PFC |
PLCQ |
| All other symbols |
PLCQ using the Intermediate Subcircuit named genesyslib_PLC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| L |
L |
|
| C |
C |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values.
|
PRC (Parallel RC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PRC in ADS.
| GENESYS Symbol |
ADS Component |
| PRC |
PRC |
| All other symbols |
PRC using the Intermediate Subcircuit named genesyslib_PRC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| C |
C |
|
| Qc |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
PRL (Parallel RL Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PRL in ADS.
| GENESYS Symbol |
ADS Component |
| PRL |
PRL |
| All other symbols |
PRL using the Intermediate Subcircuit named genesyslib_PRL_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| L |
L |
|
| QL |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
PRX (Parallel RLC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PRLC in ADS.
| GENESYS Symbol |
ADS Component |
| PRX |
PRLC |
| All other symbols |
PRLC using the Intermediate Subcircuit named genesyslib_PRX_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| L |
L |
|
| C |
C |
|
| QL |
|
Not supported by the ADS component. |
| QC |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
RES (Ideal Resistor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for R in ADS.
| GENESYS Symbol |
ADS Component |
| RESISTOR |
R |
| All other symbols |
R using the Intermediate Subcircuit named genesyslib_RES_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| |
All other ADS parameters are set to their default values. |
|
SFC (Series LC Resonator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| SFC |
SLCQ |
| All other symbols |
SLCQ using the Intermediate Subcircuit named genesyslib_SFC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| F |
 |
|
| C |
C |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values. |
|
SFL (Series LC Resonator)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| SFC |
SLCQ |
| All other symbols |
SLCQ using the Intermediate Subcircuit named genesyslib_SFL_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| F |
 |
|
| L |
L |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values. |
|
SLC (Series LC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLCQ in ADS.
| GENESYS Symbol |
ADS Component |
| SFC |
SLCQ |
| All other symbols |
SLCQ using the Intermediate Subcircuit named genesyslib_SLC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| L |
L |
|
| C |
C |
|
| QL |
Ql |
|
| QC |
Qc |
|
| |
Fl = 1 MHz |
|
| |
ModL = Constant |
|
| |
Fc = 1 MHz |
|
| |
ModC = Constant |
|
| |
All other ADS parameters are set to their default values. |
|
SRC (Series RC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SRC in ADS.
| GENESYS Symbol |
ADS Component |
| See note 1 |
SRC |
| All other symbols |
SRC using the Intermediate Subcircuit named genesyslib_SRC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| C |
C |
|
| Qc |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
Notes
- The symbol for the ADS SRC component is 7/8 inch long rather than the usual 1 inch. This means that an intermediate subcircuit (called genesyslib_SRC_SRC) is used to map the 1 inch GENESYS symbol to the 7/8 inch ADS symbol.
SRL (Series RL Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SRL in ADS.
| GENESYS Symbol |
ADS Component |
| SRL |
SRL |
| All other symbols |
SRL using the Intermediate Subcircuit named genesyslib_SRL_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
| L |
L |
|
| Ql |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
SRX (Series RLC Network)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SRLC in ADS.
| GENESYS Symbol |
ADS Component |
| SRX |
SRLC |
| All other symbols |
SRLC using the Intermediate Subcircuit named genesyslib_SRX_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| L |
L |
|
| C |
C |
|
| QL |
|
Not supported by the ADS component. |
| QC |
|
Not supported by the ADS component. |
| |
Temp |
Set to the default value (blank). |
|
| |
All other ADS parameters are set to their default values. |
TFC (Thin Film Capacitor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for TFC in ADS.
| GENESYS Symbol |
ADS Component |
| CAPACITOR |
TFC |
| All other symbols |
TFC using the Intermediate Subcircuit named genesyslib_TFC_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| W |
W |
|
| L |
L |
|
| T |
T |
|
| Er |
Er |
|
| Rho |
Rho = Rho/1.42 |
GENESYS is relative to copper. ADS is relative to gold. |
| TanD |
TanD |
|
| |
All other ADS parameters are set to their default values. |
TORIND (Toroidal Core Inductor)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for CIND2 in ADS.
| GENESYS Symbol |
ADS Component |
| INDUCTOR |
CIND2 |
| All other symbols |
CIND2 using the Intermediate Subcircuit named genesyslib_TORIND_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| N |
N |
|
| AL |
AL |
|
| Rs |
R |
|
| Qc |
Q |
|
| Fq |
Freq |
|
| |
All other ADS parameters are set to their default values. |
TRF (Transformer)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for TF in ADS.
| GENESYS Symbol |
ADS Component |
| TRANSFORMER |
TF |
| All other symbols |
TF using the Intermediate Subcircuit named genesyslib_TRF_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| P |
T= P/S |
|
| S |
|
|
| OPTION |
|
OPTION must be 0 (indicating turns rather then impedance ratio). |
| |
All other ADS parameters are set to their default values. |
|
TWO (2-port data file)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for S2P in ADS, or intermediate subcircuits.
| GENESYS Symbol |
ADS Component |
| see note 1 |
S2P |
| All other symbols |
S2P using the Intermediate Subcircuit named genesyslib_TWO_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| FILENAME |
File |
If the filename uses a relative path, you will need to edit the path so that ADS can find the file. |
| |
Type = Touchstone |
|
| |
All other ADS parameters are set to their default values. |
|
Notes
- The symbol for the ADS S2P component is a simple rectangle. The GENESYS TWO model is typically used with a variety of symbols, (amplifiers, BJTs, FETS, etc.) an intermediate sub-circuit is almost always used so that the GENESYS symbol appears in ADS.
XTL (Crystal)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for XTAL1 in ADS.
| GENESYS Symbol |
ADS Component |
| CRYSTAL |
XTAL1 |
| All other symbols |
XTAL1 using the Intermediate Subcircuit named genesyslib_XTL_<SYMBOL> |
Parameter Mapping
| GENESYS |
ADS |
Comments |
| R |
R |
|
| L |
L |
|
| Cm |
C |
|
| Co |
Cp |
|
| |
OT = 1 |
|
| |
Temp |
Set to the default value (blank). |
| |
All other ADS parameters are set to their default values. |
|
Terms of Use 
