Microstrip

MBN (Microstrip Bend)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MBEND2 in ADS.

GENESYS Symbol	ADS Component
MBN	MBEND2
All other symbols	MBEND2 using the Intermediate Subcircuit named genesyslib_MBN_<SYMBOL>

Parameter Mapping

MCN<n> (Multiple Coupled Microstrip Lines)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for PCLIN2, PCLIN3,...,PCLIN10 in ADS.

GENESYS Symbol	ADS Component
<n>-Lines	PCLIN<n>
All other symbols	PCLIN<n> using the Intermediate Subcircuit named genesyslib_MCN<n>_<SYMBOL>

Parameter Mapping

Notes

1. For ADS model PCLIN, S<n> refers to a coordinate of gaps across microstrip lines from an origin (wall), whereas for MCN, S<n> refers to a gap width. The translation between the parameters follows:
   1. (a) PCLIN.S1 = W
   2. (b) PCLIN.S<i> = W + (i * W) + Sum(MCN.S<j>, j=1...(n-1)) for i=2...n.
2. All microstrip lines lay on the same layer.

MCN4A (Asymmetric Coupled Microstrip Lines)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MACLIN in ADS.

GENESYS Symbol	ADS Component
TRL_COUPLED	MACLIN
All other symbols	MACLIN using the Intermediate Subcircuit named genesyslib_MCN4A_<SYMBOL>

Parameter Mapping

MCP (Two Coupled Microstrip Lines)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MCLIN in ADS.

GENESYS Symbol	ADS Component
TRL_COUPLED	MCLIN
All other symbols	MCLIN using the Intermediate Subcircuit named genesyslib_MCP_<SYMBOL>

Parameter Mapping

MCR (Microstrip Cross)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MCROS in ADS.

GENESYS Symbol	ADS Component
MCR	MCROS
All other symbols	MCROS using the Intermediate Subcircuit named genesyslib_MCR_<SYMBOL>

Parameter Mapping

MCURVE (Microstrip Curved Bend)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MCURVE in ADS.

GENESYS Symbol	ADS Component
MCURVE	MCURVE
All other symbols	MCURVE using the Intermediate Subcircuit named genesyslib_MCURVE_<SYMBOL>

Parameter Mapping

MEN (Microstrip Open End)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MLEF in ADS.

GENESYS Symbol	ADS Component
MEN	MLEF
All other symbols	MLEF using the Intermediate Subcircuit named genesyslib_MEN_<SYMBOL>

Parameter Mapping

MGA (Microstrip Gap)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MGAP in ADS.

GENESYS Symbol	ADS Component
MGA	MGAP
All other symbols	MGAP using the Intermediate Subcircuit named genesyslib_MGA_<SYMBOL>

Parameter Mapping

MLI (Microstrip Line)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MLIN in ADS.

GENESYS Symbol	ADS Component
MLI	MLIN
All other symbols	MLIN using the Intermediate Subcircuit named genesyslib_MLI_<SYMBOL>

Parameter Mapping

MRS (Microstrip Radial Stub)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MRSTUB in ADS.

GENESYS Symbol	ADS Component
RADIAL_STUB2	MRSTUB
All other symbols	MRSTUB using the Intermediate Subcircuit named genesyslib_MRS_<SYMBOL>

Parameter Mapping

Notes

1. Parameter value is taken from the substrate.

MST (Microstrip Step)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MSTEP in ADS.

GENESYS Symbol	ADS Component
TRL_STEP	MSTEP
All other symbols	MSTEP using the Intermediate Subcircuit named genesyslib_MST_<SYMBOL>

Parameter Mapping

Notes

1. Only the symmetrical step is supported, i.e. OPTION = 0.

MTAPER (Microstrip Linearly Tapered Line)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MTAPER in ADS.

GENESYS Symbol	ADS Component
TAPER	MTAPER
All other symbols	MTAPER using the Intermediate Subcircuit named genesyslib_MTAPER_<SYMBOL>

Parameter Mapping

MTE (Microstrip Symmetrical or Asymmetrical Tee Junction)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for MTEE in ADS.

GENESYS Symbol	ADS Component
TRL_TEE3	MTEE
All other symbols	MTEE using the Intermediate Subcircuit named genesyslib_MTE_<SYMBOL>

Parameter Mapping

MVH (Microstrip Via Hole)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for VIA in ADS.

GENESYS Symbol	ADS Component
See note 1	VIA
All other symbols	VIA using the Intermediate Subcircuit named genesyslib_MVH_<SYMBOL>

Parameter Mapping

Notes

1. An intermediate subcircuit is always used regardless of the symbol used in GENESYS.