Stripline
SBCP (Offset Broadside Coupled Striplines)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SOCLIN in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| TRL_COUPLED | SOCLIN |
| All other symbols | SOCLIN using the Intermediate Subcircuit named genesyslib_SBCP_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| WO | WO | |
| S | S | |
| L | L | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
SBN (Stripline Bend)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SBEND in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| SBN | SBEND |
| All other symbols | SBEND using the Intermediate Subcircuit named genesyslib_SBN_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| A | Angle | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
SCP (Coupled Striplines)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SCLIN in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| TRL_COUPLED | SCLIN |
| All other symbols | SCLIN using the Intermediate Subcircuit named genesyslib_SCP_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| S | S | |
| L | L | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
SEN (Stripline Open End)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLEF in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| TRL_END | SLEF |
| All other symbols | SLEF using the Intermediate Subcircuit named genesyslib_SEN_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| SUBST | Subst | |
| L = 0 mil | ||
| All other ADS parameters are set to their default values. | ||
SLI (Stripline)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLIN in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| TLE | SLIN |
| All other symbols | SLIN using the Intermediate Subcircuit named genesyslib_SLI_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| L | L | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
SLIO (Offset Striplines)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SLINO in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| TLE | SLINO |
| All other symbols | SLINO using the Intermediate Subcircuit named genesyslib_SLIO_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| W | W | |
| L | L | |
| A | Used by S. | |
| SUBST | Subst | |
| S = 2 A | ||
| All other ADS parameters are set to their default values. | ||
SSP (Stripline Step in Width)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for SSTEP in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| SSP | SSTEP |
| All other symbols | SSTEP using the Intermediate Subcircuit named genesyslib_SSP_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| NAR | W1 | |
| W | W2 | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
STE (Stripline Tee Junction)
Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for STEE in ADS.
| GENESYS Symbol | ADS Component |
|---|---|
| STE | STEE |
| All other symbols | STEE using the Intermediate Subcircuit named genesyslib_STE_<SYMBOL> |
Parameter Mapping
| GENESYS | ADS | Comments |
|---|---|---|
| WT | W1 | |
| WT | W2 | |
| SS | W3 | |
| SUBST | Subst | |
| All other ADS parameters are set to their default values. | ||
Privacy
Statement 
|
Terms of Use |
Legal |
Contact Us |
© Agilent 2000-2008
