Transistors

BIPNPN4 (Gummel-Poon BJT 4-Pin)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for M504 BJT4 NPN, M504 BJT4 PNP (Mextram 504 Nonlinear Bipolar Transistors with Substrate Terminal, NPN, PNP)  in ADS.

GENESYS Symbol	ADS Component
BIPNPN4	genBIPNPN4
All other symbols	genBIPNPN4 using the Intermediate Subcircuit named genesyslib_BIPNPN4_<SYMBOL>

Parameter Mapping

Notes

1. The default value for Rbm in GENESYS is the value of Rb. In the ADS model, this parameter defaults to 0 and not the value of Rb.

BIPNPN (Gummel-Poon BJT)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for BJT NPN, BJT PNP (Bipolar Junction Transistors NPN, PNP)  in ADS.

GENESYS Symbol	ADS Component
BIPNPN	genBIPNPN
All other symbols	genBIPNPN using the Intermediate Subcircuit named genesyslib_BIPNPN_<SYMBOL>

Parameter Mapping

Notes

1. The default value for Rbm in GENESYS is the value of Rb. In the ADS model, this parameter defaults to 0 and not the value of Rb.

BIPPNP4 (Gummel-Poon BJT 4-Pin)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for M504 BJT4 NPN, M504 BJT4 PNP (Mextram 504 Nonlinear Bipolar Transistors with Substrate Terminal, NPN, PNP)  in ADS.

GENESYS Symbol	ADS Component
BIPPNP4	genBIPPNP4
All other symbols	genBIPPNP4 using the Intermediate Subcircuit named genesyslib_BIPPNP4_<SYMBOL>

Parameter Mapping

Notes

1. The default value for Rbm in GENESYS is the value of Rb. In the ADS model, this parameter defaults to 0 and not the value of Rb.

BIPPNP (Gummel_Poon BJT)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for BJT NPN, BJT PNP (Bipolar Junction Transistors NPN, PNP)   in ADS.

GENESYS Symbol	ADS Component
BIPPNP	genBIPPNP
All other symbols	genBIPPNP using the Intermediate Subcircuit named genesyslib_BIPPNP_<SYMBOL>

Parameter Mapping

Notes

1. The default value for Rbm in GENESYS is the value of Rb. In the ADS model, this parameter defaults to 0 and not the value of Rb.

BSIM3_N (BSIM3)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for BSIM3 Model (BSIM3 MOSFET Model)  in ADS.

GENESYS Symbol	ADS Component
N_FET	genBSIM3_N
All other symbols	genBSIM3_N using the Intermediate Subcircuit named genesyslib_BSIM3_N_<SYMBOL>

Parameter Mapping

All GENESYS parameters are mapped to the corresponding ADS parameter. All other ADS parameters are set to their default values.

BSIM3_P (BSIM3)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for BSIM3 Model (BSIM3 MOSFET Model)  in ADS.

GENESYS Symbol	ADS Component
P_FET	genBSIM3_P
All other symbols	genBSIM3_P using the Intermediate Subcircuit named genesyslib_BSIM3_P_<SYMBOL>

Parameter Mapping

All GENESYS parameters are mapped to the corresponding ADS parameter. All other ADS parameters are set to their default values.

CURTICE2_N (Curtice Quadratic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Curtice2 Model (Curtice-Quadratic GaAsFET Model)  in ADS.

GENESYS Symbol	ADS Component
N_FET	genCURTICE2_N
All other symbols	genCURTICE2_N using the Intermediate Subcircuit named genesyslib_CURTICE2_N_<SYMBOL>

Parameter Mapping

CURTICE2_P (Curtice Quadratic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Curtice2 Model (Curtice-Quadratic GaAsFET Model) in ADS.

GENESYS Symbol	ADS Component
P_FET	genCURTICE2_P
All other symbols	genCURTICE2_P using the Intermediate Subcircuit named genesyslib_CURTICE2_P_<SYMBOL>

Parameter Mapping

CURTICE3_N (Curtice Cubic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Curtice3 Model (Curtice-Cubic GaAsFET Model)  in ADS.

GENESYS Symbol	ADS Component
N_FET	genCURTICE3_N
All other symbols	genCURTICE3_N using the Intermediate Subcircuit named genesyslib_CURTICE3_N_<SYMBOL>

Parameter Mapping

All GENESYS parameters are mapped to the corresponding ADS parameter. All other ADS parameters are set to their default values.

CURTICE3_P (Curtice Cubic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Curtice3 Model (Curtice-Cubic GaAsFET Model)  in ADS.

GENESYS Symbol	ADS Component
P_FET	genCURTICE3_P
All other symbols	genCURTICE3_P using the Intermediate Subcircuit named genesyslib_CURTICE3_P_<SYMBOL>

Parameter Mapping

All GENESYS parameters are mapped to the corresponding ADS parameter. All other ADS parameters are set to their default values.

STATZ_N (Curtice Quadratic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Statz Model (Statz Raytheon GaAsFET Model)  in ADS.

GENESYS Symbol	ADS Component
N_FET	genSTATZ_N
All other symbols	genSTATZ_N using the Intermediate Subcircuit named genesyslib_STATZ_N_<SYMBOL>

Parameter Mapping

STATZ_P (Curtice Quadratic)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for Statz Model (Statz Raytheon GaAsFET Model)  in ADS.

GENESYS Symbol	ADS Component
P_FET	genSTATZ_P
All other symbols	genSTATZ_P using the Intermediate Subcircuit named genesyslib_STATZ_P_<SYMBOL>

Parameter Mapping

TOM3_N (Tom3 Verilog_A model)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for TOM3 Model (TriQuint TOM3 Scalable Nonlinear FET Model)  in ADS.

GENESYS Symbol	ADS Component
N_FET	genTOM3_N
All other symbols	genTOM3_N using the Intermediate Subcircuit named genesyslib_TOM3_N_<SYMBOL>

Parameter Mapping

TOM3_P (Tom3 Verilog_A model)

Documentation in this chapter is for translation information/notes only. For more information, please see the GENESYS documentation for this model or refer to the documentation for TOM3 Model (TriQuint TOM3 Scalable Nonlinear FET Model)  in ADS.

GENESYS Symbol	ADS Component
P_FET	genTOM3_P
All other symbols	genTOM3_P using the Intermediate Subcircuit named genesyslib_TOM3_P_<SYMBOL>

Parameter Mapping