CM_N6030_FileRead

Description: N6030 Arbitrary Waveform file read
Library: Instruments
Class: SDFCM_N6030_FileRead

Parameters

Name	Description	Default	Type
FileNameI	Output baseband studio file name for In-channel data	file_i.bin	filename
FileNameQ	Output baseband studio file name for Quadrature-channel data	file_q.bin	filename
ControlSimulation	Control simulation: NO, YES	YES	enum
Periodic	Periodic output: NO, YES	YES	enum

Pin Outputs

Pin	Name	Description	Signal Type
1	output		complex

Notes/Equations

1. CM_N6030_FileRead can read Arbitrary Waveform Generator file for N6030 instrument. Agilent's N6030 series of arbitrary waveform generators deliver unprecedented performance for creation of complex wideband waveforms. High sampling rate and high bit resolution provided in a single instrument enable designers to create ideal waveforms for accurate test of radar, satellite and frequency agile systems. For example, each channel of the N6030A provides 500 MHz of modulation bandwidths and over 65 dBc of spurious free dynamic range. When the N6030A is combined with a wideband I/Q upconverter, modulation bandwidth of 1 GHz can be realized at microwave frequencies for authentic signal simulations for IF and RF subsystem test.
2. This component as an ADS Source can read in recorded baseband IQ data from two files (16 bit I, Q data) and create a complex signal with IQ components compatible with the Baseband Studio product. The data is in long, unique test signals, up to hours in length directly.
3. The CM_N6030_FileWrite and CM_N6030_FileRead components can be used to save and playback long I/Q sequences within ADS.
4. If the length of simulation is larger than the available data in the file, use the Periodic parameter to repeat the old data. If Periodic=YES, all data from the file will be read and repeated. If Periodic=NO, the output will be zero after all data is read.
5. If ControlSimulation=YES, the simulation will run from Start to Stop-Start+1.