lcuiuser_set_freq_unit()

Sets the frequency unit string value, freqUnitString. Note that freqUnitString must be one of the unit strings supported by LineCalc. The supported frequency units are: GHz, MHz, kHz, and Hz. Returns: None.
See also: lcuiuser_set_angle_unit(), lcuiuser_set_freq_value(), lcuiuser_set_length_unit(), lcuiuser_set_res_unit()

Syntax:

defun lcuiuser_set_freq_unit(freqUnitString)

where
freqUnitString is the new frequency unit string

Example

lcuiuser_set_freq_unit("GHz");