lcuiuser_set_res_unit()

Sets the resistor unit string value, resUnitString. Note that it must be one of the unit strings supported by LineCalc. The supported resistor units are: kohm and ohm. Returns: None.
See also: lcuiuser_set_angle_unit(), lcuiuser_set_freq_unit(), lcuiuser_set_length_unit()

Syntax:

defun lcuiuser_set_res_unit(resUnitString)

where
resUnitString is the new resistor unit string

Example

lcuiuser_set_res_unit("ohm");