Resistor Device

The Spectre resistor device is translated as an ADS resistor device. For information on the resistor model, refer to R_Model (Resistor Model).

Without model referenced:
r1 (1 2) resistor r=1.2k m=2
With model referenced:
r1 (1 2) resmod l=8u w=1u

Without model referenced:
name n1 n2 resistor [param= value ]*
With model referenced:
name n1 n2 mname [param= value ]*

R: rid n1 n2 R= value [param= value ]*

ADS Name	Unit	Default	Spectre Name	Unit	Default
R	ohms	50	r	ihms
TC1	1/°C	0.0	tc1	1/°C	0.0
TC2	1/°C ²	0.0	tc2	1/°C ²	0.0
Noise		yes	isnoisy		yes
Length	m		l	m
Width	m		w	m
_M		1	m		1
Parameters not in Spectre Model
Temp ^†	°C	25
Tnom	°C	25
wPmax	W	infinity
wImax	A	infinity
Model
Secured
			Parameters not in ADS Model
			trise	°C	0.0
			resform		yes
			scale		1
^† Temp = trise + temp ("temp" is an ADS global variable)

The value of R may be positive or negative but not zero in the netlist.
The value of R cannot be an expression that changes during the simulation.
If SCALE is specified, Value = Value * scale .
If trise is provided, Temp = trise + temp ( temp is an ADS global variable).